The fill valve is tested for shutoff, so a running toilet is traced to the valve or the flapper, not guessed.
Toilet Repair & Installation Cleveland TX That Stops the Running
A running toilet wastes water every hour it runs. We fix the fill valve, the flapper, or the seal — and where the toilet itself is done, we install a replacement.
Serving Cleveland and our 12 service areas.
How big is the toilet job?
Part replacement
A fill valve or flapper that has failed, replaced the same visit.
- 1. Part replacement A fill valve or flapper that has failed, replaced the same visit.
- 2. Seal or base repair A leaking base or a rocking toilet, fixed at the seal and the flange.
- 3. Full replacement A toilet that keeps failing or is cracked, replaced with a new unit.
Drag the needle to compareTouch and drag the needle
- 26Services from one local team
- 12Areas served around Cleveland
- Written quoteAsk for a quote first
- LicensedRMP M-42402 — TSBPE
What a Toilet Repair Visit Covers
The running, the leak, or the weak flush is traced to the part that failed, then fixed or replaced.

Work order
Toilet Repair & Installation- Running Toilet Check: The fill valve, the flapper, and the water level are checked in turn, because a running toilet has more than one cause.
- Leak Check: The base, the supply line, and the tank are checked for leaks, so a damp floor is traced to the right place.
- Flush Test: A weak flush is traced to the rim jets, the trapway, or the water level, not assumed to be the toilet itself.
- Seal and Flange: A rocking toilet or a leak at the base is checked at the wax seal and the flange, which is where the fix usually sits.
- Repair or Replace in Writing: Repair and replacement are put side by side where both are real, can be quoted before work starts.
What the first toilet visit covers
First visit
We find why the toilet runs, leaks, or flushes weakly, then fix the part that failed.
Toilet work at Cleveland homes
Running toilets, leaking bases, and weak flushes in houses, rentals, and manufactured homes.
Running toilet
A toilet that runs constantly, usually a fill valve or a flapper.
Leaking base
Water at the base, traced to the seal, the flange, or the supply line.
Weak flush
A flush that does not clear the bowl, traced to the jets, the trapway, or the water level.
Rocking toilet
A toilet that moves is checked at the flange and the floor before it is reset.

Toilet work at Cleveland businesses
A running or leaking toilet in a business wastes water and closes a restroom. The part is fixed, or the unit is replaced.
Restaurant restrooms
Running toilets and leaking bases fixed around service hours.
Office restrooms
A restroom out of service is fixed the same visit where the part allows.
Multi-unit restrooms
The same toilet fault across several units is checked against the shared supply.
What Toilet Repair Cleveland TX Really Involves
A toilet is a simple machine with a short list of failures. The skill is in telling them apart: a running toilet, a leaking base, and a weak flush are three different repairs.
Toilet repair and installation in Cleveland, TX, covers the failures a household actually sees. A running toilet is the top symptom, and it is usually a fill valve that will not shut off or a flapper that no longer seals — either one wastes water every hour it runs, and either one is a same-visit part replacement. A leak at the base is usually the wax seal or the flange, and a rocking toilet means the flange or the floor needs attention before the seal is reset. A weak flush is traced to the rim jets, the trapway, or the water level, because a clogged toilet and a failing toilet feel the same from the seat and are fixed differently. Where the toilet itself is cracked or keeps failing, replacement is the honest answer, and the new unit is installed, sealed, and tested before we leave.
A clogged toilet is a different triage: a toilet-only clog points here, while a clog that affects several fixtures points to the main — see Drain Cleaning for a multi-fixture backup. A toilet that runs constantly also shows up on the water bill, so a high bill with a running toilet is worth checking at the toilet first — see Leak Detection if the bill stays high after the toilet is fixed. Related reading: Why Is My Toilet Running Constantly?.

- What it is
- Repair and installation of toilets: running, leaking, weak flush, and replacement.
- When it helps
- A toilet that runs, leaks at the base, flushes weakly, or rocks on the floor.
- What you get
- The failed part fixed or the unit replaced, tested before we leave.
How a Toilet Call Runs
Five steps, from the running toilet to a flush that stops when it should.
Tools We Bring to a Toilet
A toilet has a short list of parts. Testing tells us which one failed.
The flapper and the tank seals are checked for wear, so a leak is found at the part, not the porcelain.
A rocking toilet is checked at the flange and the floor before the seal is reset.
A toilet auger clears a clog in the trapway without scratching the porcelain.
The new seal, bolts, and supply line that a reset or a replacement actually needs.
When to Call for Toilet Repair
A homeowner in Liberty Estates has a toilet that runs all night.
A fill valve or flapper has failed. The part is replaced the same visit, and the water stops wasting.
HomesA restaurant has a toilet leaking at the base.
The seal or the flange is the usual cause. The toilet is reset around service.
BusinessesA property manager has a rental toilet that flushes weakly.
A weak flush is traced to the jets, the trapway, or the water level before anything is replaced.
Homes and businessesA homeowner wants a toilet replaced during a bathroom update.
The old unit is removed, the flange is checked, and the new toilet is installed, sealed, and tested.
Homes
How Toilet Work Runs in Cleveland
Toilet work in Cleveland is the same in every home type — the parts are the same, and the failures are the same. What changes is the water: hard regional water wears seals and valves faster. We work across Liberty Estates and Southern Crossing, and the other Cleveland areas listed on this page.
Liberty Estates
New-build homes where a running toilet is usually a single failed fill valve or flapper.
Downtown Cleveland
Older homes where a toilet may sit on a flange that has seen decades of use, and the floor needs checking before a reset.
Southern Crossing
Mixed site-built and manufactured homes, where a toilet replacement is planned around the home type and the flange.

- Liberty Estates
- Downtown Cleveland
- Southern Crossing
- SH-105 Corridor
From problem to finished result.
Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.
PhotoRunning Toilet Stopped
Before: A toilet ran all night, and the water bill had started to climb.
After: The fill valve had failed. We replaced it, checked the flapper, and the toilet filled and shut off properly.
Leaking Base Fixed
Before: Water was pooling at the base of a toilet, and the floor was starting to stain.
After: The wax seal had failed. We reset the toilet on a new seal, checked the flange, and the base stayed dry.
Weak Flush Fixed
Before: A toilet flushed weakly and needed two flushes to clear the bowl.
After: The rim jets were clogged with scale. We cleared them, set the water level, and the flush cleared the bowl in one go.
Toilet Problems We Fix in Cleveland
The toilet symptoms, and what usually sits behind them.
Running toilet
A fill valve that will not shut off, or a flapper that no longer seals.
Leaking base
A failed wax seal or flange, or a leaking supply line.
Weak flush
Clogged rim jets, a trapway problem, or a water level set too low.
Rocking toilet
A flange or floor problem that needs fixing before the seal is reset.
Why Toilet Work Done Properly Matters
A running toilet wastes water every hour it runs. A leaking base damages the floor under it. Both are fixed by finding the part that failed.
Stops the Waste
A running toilet is fixed at the part, so the water stops wasting the same visit.
Protects the Floor
A leaking base is traced to the seal or flange before the floor is damaged.
Tested Before We Leave
The toilet is flushed several times and the base is checked for leaks.
Repair or Replace, Honestly
A toilet that keeps failing is replaced rather than patched again, and the choice can be quoted before work starts.
What you leave with
Clear records you can keep and share.
What failed
The part that failed, in plain words.
What was replaced
The part or the unit fitted, and what was checked around it.
Test results
The toilet flushed several times, with the base checked for leaks.
Licensed by the Texas State Board of Plumbing Examiners
RMP M-42402
Our Responsible Master Plumber is Arnold Jay Strass Jr., Master Plumber licence M-42402, current through 06/30/2027.
Ask for a written scopeToilet Work Done by Plumbers
Toilet repair and installation is done by licensed plumbers under our Responsible Master Plumber, to the International Plumbing Code (IPC), 2015 edition, as adopted by the City of Cleveland.

Running has two causes
A fill valve or a flapper — tested in turn, not guessed.
Base leaks are seals
A leak at the base is usually the wax seal or the flange.
Weak flush has three causes
Rim jets, trapway, or water level — traced before anything is replaced.
Is your Cleveland area covered?
Type your ZIP code or town to check. If you are not listed, call and ask.
Cleveland ZIP codes
- 77327
- 77328
- US-59 Corridor
- SH-105 Corridor
- SH-321 Corridor
Towns we serve.
Based in Cleveland and covering the places around it. Pick one for local details.
What Cleveland Customers Say
4.7 stars from 13 Google reviews
I had received a ridiculous quote from another company to replace my water heater. I thought we could have it done much more reasonably. I found Jay and Precision Plumbing through Angie's List. The entire experience could not have gone more smoothly! His price was much more reasonable and I was happy to pay it. They had the unit swapped out super quick. Jay was always responsive. Basically everything you need and want when you need a plumber, quickly.
Robert Barton5 stars · Google review · a year ago
Victor and his crew did a great job installing my water softener and water filter in my house. I will definitely use Precision Plumbing for all my plumbing needs from now on. Highly recommend Victor and Precision Plumbing. Very professional and courteous.
Robert5 stars · Google review · a year ago
Another job well done! Needed my shower valve replaced. Will continue to use this company. (8/21/25)
hillary cranston5 stars · Google review · a year ago
Definitely recommend Precision Plumbing for any plumbing needs. The company that I work for, Whitestone Construction, has been using Precision Plumbing for about 2+ years now. They were actually recommended to me by a Regional Supervisor within our team and all of our PMs have nothing but positive experiences with this company. 10/10 quality work and fair pricing whether it's a commercial remodeling project or just a basic plumbing repair on a residential home.
Rafael Martinez5 stars · Google review · a year ago
I've been working with Victor and Javier on multi-family remodeling since 2022. Why? Because they care. Their guys are fast, efficient and clean. Victor and Javier will give you everything you paid for and probably throw in a little extra when you're not expecting it. They did some work at my home recently. They were in and out quicker than I expected and they were as unobtrusive as possible while they were here. Shoot! Even the city inspectors like 'em.
John Sczerby5 stars · Google review · a year ago
Toilet Questions We Hear
Short answers for the first few minutes. The team can cover the rest.
Describe what you are seeing and we will point you to the right next step.
(346) 687-0011Usually a fill valve that will not shut off, or a flapper that no longer seals. Both waste water every hour they run, and both are a same-visit part replacement. We test the valve and the flapper in turn to find which one failed.
A single failed part is a repair. A toilet that is cracked, or that keeps failing after repairs, is usually better replaced. We put both options side by side where both are real, can be quoted before work starts.
Which part has failed, whether the toilet needs resetting on a new seal, and whether the unit itself needs replacing. Ask us to quote the repair or the replacement in writing before work starts.
A toilet-only clog is usually a toilet problem, cleared with a toilet auger. If several fixtures are backing up at once, the problem is in the main line, not the toilet — and the main needs clearing and a camera check.
Get Toilet Repair Cleveland TX Scheduled
(346) 687-0011A toilet that runs, leaks, or flushes weakly — call (346) 687-0011 and tell us what it is doing.
Contact Precision Plumbing LLC
Call (346) 687-0011 to schedule toilet repair or installation, or ask a question. Monday to Saturday, 7:00 AM to 5:30 PM. Sunday Closed. Tell us whether the toilet runs, leaks, or flushes weakly.
Call to book a visit
Phone is the fastest way to reach us during business hours. Call and tell us what is happening and where.
Hours: Monday–Saturday 7:00 AM–5:30 PM, Sunday Closed. Phone is the only contact channel.
Licensed by the Texas State Board of Plumbing Examiners — RMP M-42402.
737 County Rd 3773, Cleveland, TX 77327







